 |
 |
Name： |
The closing baffle damper |
Content： |
The closing baffle damper The closing baffle damper is used for the working medium closure in the smoke and wind pipeline in the electricity factory. It has two functions----full open and full close, which can let the medium in the pipeline in full circulation or closure. There are stainless steel seal plate between the baffles or between the baffle and the doorframe. The open and close angles of the damper are 90, open and close time ≤ 40 seconds.
The width and lengthen in the damper specifications refers to the inside size of the damper frame.
Choose the damper with the same or similar specifications according to the inside sizes of the pipe connecting to the damper. The allowable maximum dislocation of each edge is 50mm.
In the pipeline layout, the baffle axis of the damper should be kept in the horizontal position.
The user shall choose the electric actuator which matched to the damper. When you order the damper,
you need to offer the working parameters:
Maximum working pressure （P）MMH2O
Maximum working temperature （t）℃
Working medium
The usage and location of the damper in the pipeline |
|
